Wood Countertops from Brooks Custom
Butcher Block Installation Guide
- Provide as much level support as possible.
- Do not install if the block is rocking on the sub-surface.
- Clean sub-surface with alcohol to remove excess oil or dust before adhering.
- Use high quality 100% silicone as an adhesive and bed for the block. (this allows for future movement)
- Screws should be used at the cardinal points of the top. An oversized hole (5/8”) and fender washer (1/4”) may be used through the cabinet top. This will allow the block to expand and contract. Important : Do not screw the top down without the ability to move. This will cause cracking, splitting, and failure outside the warranty.
- Seal any dishwasher, under counter oven, fridge compartment, or heated plenum, with a sheet metal cover so as to keep out heat and steam. This material is available at most hardware stores, lumber yards ,or roofing supply distributors.
- At the splash: Do not grout down onto the countertop. Create a grout width line and fill with a flexible color matched caulk. This allows for future movement.
- Give top a coat of Weiman's Furniture Cream (all natural) or Brooks Butcher Block Oil. Buff out to a high protective sheen.
- We have a three week production schedule. The top's finish is still fresh and needs to cure and harden. Do not put weight and heavy use items on your top for about a month.
